> 
The Evapoler®Hybrid Air conditioner is an advance technology innovation in Air conditioning which brings down the running cost of comfort as well as process cooling by up to 60% compared to conventional air conditioning. Evaporative hybrid air cooling is a weather proof machine and provides uniform cooling throughout the year. This Evaporative Hybrid air cooling system combines indirect evaporative cooling with Mechanical air conditioning to solve the most pressing challenge of cooling faced during Monsoon / hot & humid periods of the year
The Evapoler®HAC utilises the advanced industry technology of indirect direct Evaporative cooling with Dx Cooling system for hot & humid days. The Sensible heat of ambient air is brought down significantly in 1st stage by Sensible heat Exchanger. As such ,Indirect evaporative cooling section significantly reduces the size of Evaporator coil thereby resulting in energy saving and increased efficiency. The residual minimised sensible load and latent load, after 1st stage is taken care of by Dx system. The Evaporative Hybrid cooling system automatically switches to low energy modes through intelligent control system as per pre-set space conditions. This means the higher energy system are only used when needed, ensuring uniform cooling and substantial energy savings.
The condenser coils located within the heat removal section of the Evaporative Air conditioning system, ensure the air onto the coil is always pre-cooled to the wet bulb temperature of the ambient. It considerably increases the efficiency when compared to traditional condenser system. Alternatively, scavenging air of IDEC system can be used to pre-cool out door condensing unit to increase its efficiency in scorching summer.
The combination of this innovative Indirect direct evaporative cooling with Mechanical air conditioning result in best performance by Hybrid air cooling with highest energy efficiency and minimised operating costs.
Its area of operation include industrial spaces, factories, commercial offices, server rooms / UPS rooms, Panel Rooms, data centres and industrial processes that require stringent temperature and RH control.
| SPECS/MODEL | HAC 70K-10TR | HAC-119K-17TR |
|---|---|---|
| Discharge Type | Side | Side |
| Cooling Capacity (Ton) | 10 | 17 |
| Air Flow CMH | 7000 | 1190 |
| Air FlowCFM | 4000 | 700 |
| Cooling Coil | CW /DX COIL | |
| Adibatic Heat Exchanger | High efficiency Treated special cellulose material with saturation upto 90%, Make: Munters/DRI/Equivalent | |
| Motor Make | ABB / Siemens / crompton | |
| Sensible Heat Exchanger | Engineered Polymer Plat Heat Exchanger / Copper tube with aluminium Fins | |
| Adibatic Heat Exchanger | High efficiency Treated special cellulose material with saturation upto 90%, Make: Munters/DRI/Equivalent | |
| Motor Make | ABB / Siemens / crompton | |
| Motor specification | IP-55 Protected,IE2/IE3 Efficiency, TEFC ,4P | |
| Blower Motor Power (kw) | 1.5 | 5.5 |
| Power Supply (Ph/ V/Hz) | 3-ph /415/50 | 3-ph/415 / 50 |
| Low Water Level Sensor | Yes | |
| Controller | Industrial Grade Controller, Component Make: Siemens/Schnieder/L&T | |
| Remote | Corded remote with on/off, pump, blower switch | |
| Filtration | Non Woven HDPE media , Filtration efficiency 90% down to 10 microns, Make: Mechmaark/spectrum/Equivalent | |
EVAPOLER® Hybrid AC v/s AC
CASE STUDY CEMENT PLANT Panel Room
| SPECS/MODEL | HAC 70K-10TR | HAC-119K-17TR |
|---|---|---|
| Discharge Type | Side | Side |
| Cooling Capacity (Ton) | 10 | 17 |
| Air Flow CMH | 7000 | 1190 |
| Air FlowCFM | 4000 | 700 |
| Cooling Coil | CW /DX COIL | |
| Adibatic Heat Exchanger | High efficiency Treated special cellulose material with saturation upto 90%, Make: Munters/DRI/Equivalent | |
| Motor Make | ABB / Siemens / crompton | |
| Sensible Heat Exchanger | Engineered Polymer Plat Heat Exchanger / Copper tube with aluminium Fins | |
| Sensible Heat Exchanger | Engineered Polymer Plat Heat Exchanger / Copper tube with aluminium Fins | |
All Product
Hi-static Brochure
IDEC Brochure
Hybrid Cooling
